---------------------------- Release notes for Repute 2.5 ---------------------------- ©2002-17 Geocentrix Ltd. All rights reserved. "Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd. Last updated: 25/07/2017 Contents: Repute 2.5 (Update 0) Program files in the latest build Repute 2.5 Release Candidate 1 (build 17080) -------------------------------------------- Version 2.5.0.17080 Released 03/08/2017 Issues fixed (25 items): 2922 Revise use of term 'rigid layer' now that support for rock has been added to the program 2921 Increase bearing pressure limit in algorithm to allow for piles bearing on rock 2918 Results for pile cap (settlement, force, moment, rotation) are missing from the Reporter 2916 Results differ between Windows and DOS version of PGroupN 2914 Assertion failed: intf != 0, file ..\utilcls.h, line 2298 2913 Input error: Layer type flag is not 1, 2, 3, or 4 2912 Contents of Quick-Start Guide should be revised for version 2.5 2911 Contents of Reference Manual should be revised for version 2.5 2909 Reporter shows unnecessary data for boundary element analysis 2908 Rock factors k1-k4 are missing from the Reporter 2907 Skin friction and bearing pressure limits are missing from the Reporter 2906 Information is missing from Reporter 2903 Program crashes when number of load increments is increased to 200 in BEM analysis 2901 Soil report does not record values of Young's modulus 2896 Disable non-linear options that are not used in boundary element analysis 2895 Program crashes on changing boundary element Stress-Strain Model to Hyperbolic 2894 Program crashes on changing Save Results flag 2893 Program crashes on re-opening project file 2892 Program crashes on changing rock layer to drained 2891 Change 'Is drained?' flag to 'Drained/Undrained' 2889 Default values of rock properties in Borehole Wizard are out of range in Property Inspector 2887 Cannot deselect 'Has Casing' flag for bored pile 2886 Mean elastic modulus for concrete should be displayed in GPa not MPa 2853 A pile with X-rake = 30 deg and Y-rake = -30 deg is incorrectly detected as an asymmetrically raked pile 2852 Cannot link Beta Algorithm to Soil Layer Repute 2.5 Beta 3 (build 17073) ------------------------------- Version 2.5.0.17073 Released 25/07/2017 Issues fixed (6 items): 2904 Increase default number of load increments in boundary element analysis to 200 2902 PGroupN engine does not use multi processor FORTRAN libraries 2900 Default value of rock k3 parameter is outside the allowable range 2898 Skin friction limit for second layer is ignored in multi-layer soil profile 2897 Reinstate ability to set global limits on skin friction and end bearing 2888 PGroupN calculation window shows strange values (è,h') Repute 2.5 Beta 2 (build 17054) ------------------------------- Version 2.5.0.17054 Released 23/06/2017 Issues fixed (11 items): 2880 Revise default layer averaging option (Poulos vs Yamashita) depending on the design situation 2878 Generated PGN file has strange values for phi/delta angles of Soil 2=sand 2877 PGN file includes an alpha value for rock, which is not needed 2876 Pure virtual function called when changing properties of Boundary Element Analysis 2875 Boundary Element Analysis displays wrong message when unable to generate PGN data for rock 2874 Program crashes changing BEA stress-strain model to hyperbolic when drainage condition is drained 2873 Problems caused by rock angle of shearing resistance of 30 degrees 2872 Borehole Wizard does not cater for invalid rock weight density 2871 Borehole Wizard does not provide facility to enter UCS for rock 2870 Borehole Wizard has not assigned rock to Layer 3 2869 Project Wizard is unable to navigate outside the Documents folder Repute 2.5 Beta 1 (build 17053) ------------------------------- Version 2.5.0.17053 Released 01/06/2017 Issues fixed (41 items): 2838 Project Manager should differentiate between calculations by using different icons 2835 Disregard specified design standard in Boundary Element Analysis created in Repute v2.0 and earlier 2834 "User options not found" appears as a Warning Message at program startup 2833 Messages should be sorted by date not time 2831 Message Board does not display duplicate messages even when generated some time apart 2830 Text is not visible on title bar on program startup on Windows 10 2829 Change default Boundary Element Analysis model to Linear Elastic 2825 Hide R factors for linear-elastic/perfectly-plastic model in Boundary Element Analysis Property Inspector 2817 Increase the available pile types in the Pile Group Wizard 2813 XML Project File does not display on Windows 10 ("Access is denied") 2811 Section is not copied when H-pile is duplicated 2808 Display name of design standard used in Longitudinal ULS calculation 2807 Cannot enter Ks value of 0.4 for normally consolidated soil 2799 Version number passed via PGN file is wrong 2796 Confusing error message on opening project: Unconfined strength of rock ... has been reset to 30 MPa (was previously 30 MPa) 2795 Program won't accept angle of shearing resistance (35 deg) within rock range (30-38 deg) 2794 Provide realistic limits to possible lengths and diameters of CFA piles 2793 Invalid cylinder strength is read on opening RPX file containing concrete with no cylinder strength specified 2784 Improve speed of program by linking with Intel's Maths Kernel Library (MKL) 2772 Promote non-linear options one level in Property Inspector for Boundary Element Analysis 2770 Stockyard shows redundant 'PipeSection' item under Pipes 2753 Check length specified for Spun Piles is possible 2737 Add C60 concrete grade 2729 Add scaling factor to combination of actions to allow < 100% of loads to be applied 2680 Relax the upper limit on dG/dz for lightly cemented sands 2673 Details of certain algorithms are missing from the Reference Manual 2603 Add square precast concrete driven piles to Pile Group Wizard 2537 Provide option to control expansion of tree view when Property Inspector is first displayed 2536 Add further pages to Program Options box, User Interface section 2487 Remove dependency on Aladdin HASP License Manager 2371 No units for Section/Diameter on second page of Pile Group Wizard 2125 Tubular piles are not available for selection in the Pile Group Wizard 2114 Provide ability to specify pile (x, y) co-ordinates by importing data from a spreadsheet 1999 Allow user to select which sections and materials appear in the Stockyard via a page in Program Options 1685 Browser page in Program Options box is redundant 1684 Units, Reports and XML pages in the Program Options box need amending 1439 Add driven concrete piles to the options available in the Pile Group Wizard 1434 Allow 'rounded' pile diameters to be entered via Pile Group Wizard 1372 Should not need to press ENTER to change check boxes settings in the Property Inspector 1326 Error loading XML document 'Output.xml' owing to ampersand '&' in Boundary Element Analysis name 1135 Project > Reset Datum does not automatically force refresh of Drawing Board Program files in the latest build --------------------------------- > indicates file has changed from the previous version ***Geocentrix executables*** > Repute2.exe (2.5.0) ***Geocentrix dynamic link libraries*** > Actions.dll (1.17.1) > Algorithms.dll (1.17.1) > BearingCoefficients.dll (1.17.1) > Boreholes.dll (3.17.1) > EarthCoefficients.dll (3.17.1) > Engineering.dll (4.17.1) > Geocentrix.dll (4.17.1) > Grounds.dll (3.17.1) > Interfaces.dll (3.17.1) > Materials.dll (4.17.1) > Piles.dll (2.17.1) > Platform.dll (4.17.1) > Project.dll (4.17.1) > Reports.dll (1.17.1) > Repute.dll (2.17.1) > Repute1.dll (2.17.1) > RexML.dll (1.17.1) > RexUI.dll (1.17.1) > Scenarios.dll (1.17.1) > Sections.dll (1.17.1) > Soils.dll (4.17.1) > Standards.dll (3.17.1) > Surcharges.dll (3.17.1) > WaterTables.dll (4.17.1) ***Boost dynamic link libraries*** boost_date_time-bcb-mt-1_34_1.dll boost_program_options-bcb-mt-1_34_1.dll boost_signals-bcb-mt-1_34_1.dll boost_thread-bcb-mt-1_34_1.dll ***CodeGear dynamic link libraries*** borlndmm.dll (11.0.2902.10471) cc3280mt.dll (8.0.0.2) ***CodeGear packages*** bcbie100.bpl (11.0.2902.10471) dbrtl100.bpl (11.0.2902.10471) rtl100.bpl (11.0.2902.10471) vcl100.bpl (11.0.2902.10471) vcldb100.bpl (11.0.2902.10471) vcljpg100.bpl (11.0.2902.10471) vclx100.bpl (11.0.2902.10471) ***Developer Express packages*** ***all (2013.2.4)*** cxDataRS11.bpl cxEditorsRS11.bpl cxExportRS11.bpl cxGridRS11.bpl cxLibraryRS11.bpl cxPageControldxBarPopupMenuRS11.bpl cxPageControlRS11.bpl cxSpreadSheetRS11.bpl cxTreeListRS11.bpl cxVerticalGridRS11.bpl dxBarExtItemsRS11.bpl dxBarRS11.bpl dxComnRS11.bpl dxCoreRS11.bpl dxDockingRS11.bpl dxGDIPlusRS11.bpl dxLayoutControlRS11.bpl dxNavBarRS11.bpl dxPSCoreRS11.bpl dxPScxCommonRS11.bpl dxPScxExtCommonRS11.bpl dxPScxGridLnkRS11.bpl dxPScxPCProdRS11.bpl dxPScxTLLnkRS11.bpl dxPScxVGridLnkRS11.bpl dxPSdxLCLnkRS11.bpl dxPSLnksRS11.bpl dxPSPrVwAdvRS11.bpl dxPSPrVwRibbonRS11.bpl dxPSTeeChartRS11.bpl dxRibbonRS11.bpl dxRibbonCustomizationFormRS11.bpl dxServerModeRS11.bpl dxSkinOffice2007BlackRS11.bpl dxSkinOffice2007BlueRS11.bpl dxSkinOffice2007GreenRS11.bpl dxSkinOffice2007SilverRS11.bpl dxSkinsCoreRS11.bpl dxSkinscxPCPainterRS11.bpl dxSkinsdxBarPainterRS11.bpl dxSkinsdxDLPainterRS11.bpl dxSkinsdxNavBarPainterRS11.bpl dxSkinsdxRibbonPainterRS11.bpl dxThemeRS11.bpl ***FastReport packages*** ***all (5.5.11)*** frx11.bpl fs11.bpl ***MJ Freelancing packages*** MJFAFSystemC11.bpl (3.6.0.11) ***OCXs*** hhctrl.ocx (5.2.3790.4110) ***Raize Software packages*** DM15_100.bpl (1.5.2.0) ***Sentinel dynamic link libraries*** hasp_windows_48297.dll (7.1.1.42508) > sntl_admin_api_windows.dll (6.0.1.41705) > sntl_licgen_windows.dll (7.4.1.55968) ***Steema TeeChart packages*** ***all (9.0.7.121105)*** Tee911.bpl TeePro911.bpl TeeUI911.bpl TeeUser9.hlp (07/06/2007) ***other files*** Repute2.exe.manifest (10/02/2006) Help\ Repute2.chm (22/09/2009) Manuals\ > Repute 2 Quick-Start Guide.pdf (26/05/2017) > Repute 2 Reference Manual.pdf (01/06/2017) > Repute 2 User Manual.pdf (01/06/2017) Materials\ Concretes\ (all 22/06/2010, except *08/12/2015) BS 8110\ C25.xml C30.xml C35.xml C40.xml C45.xml C50.xml > C60.xml* EN 206\ C8-10.xml C12-15.xml C16-20.xml C20-25.xml C25-30.xml C30-37.xml C35-45.xml C40-50.xml C45-55.xml C50-60.xml > C55-67.xml* > C60-75.xml* > C70-85.xml* > C80-95.xml* > C90-105.xml* Steels\ (all 27/09/2016) > BS 4360 Specification for weldable structural steels\ > 43.xml > 50.xml > 55.xml > Corus\ > Advance 275.xml > Advance 355.xml > EN 10025 Hot-rolled products of structural steel\ > Legacy\ > Fe360.xml > Fe430.xml > Fe510.xml > E295.xml > E335.xml > E360.xml > S185.xml > S235.xml > S275.xml > S355.xml > S450.xml > EN 10248 Hot-rolled sheet piling of non allo steels\ > S240GP.xml > S270GP.xml > S320GP.xml > S355GP.xml > S390GP.xml > S430GP.xml PGroupN\ > libiomp5md.dll (5.0.2009.811) > PGroupN2.exe (2.17.5.17070) Projects\ Benchmarks\ (all 23/01/2014) RPT-001.rpx RPT-002.rpx RPT-003.rpx Examples\ (all 22/01/2014) Bond and Harris (2008) Ex 13.1.rpx Fleming (1992).rpx Fleming et al Chapter 4 Example 1 (1992).rpx Large circular group.rpx Randolph (1992).rpx Tomlinson (1994).rpx PGroup\ Problem1.pg (12/09/2002) PGroupN\ 2D-Linear.pgn (26/04/2002) etc... Repute 1 Tutorial 1\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step6.pgn* 11/01/2009 Step6.rpx Step6.xml* 11/01/2009 Tutorial 2\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step8.pgn* 11/01/2009 Step8.rpx Step8.xml* 11/01/2009 Tutorial 3\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.pgn* 11/01/2009 Step4.rpx Step4.xml* 11/01/2009 Tutorial1.rpx Templates\ (empty) Tutorials\ Tutorial 1\ (all 25/05/2017) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Step7.rpx > Tutorial 1.rpx Tutorial 2\ (all 04-25/05/2017) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Step7.rpx > Tutorial 2.rpx Tutorial 3\ (all 25/05/2017) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Step7.rpx > Step8.rpx > Step9.rpx > Tutorial 3.rpx Tutorial 4\ (all 25/05/2017) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 4.rpx Tutorial 5\ (all 26/04/2017, except*) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Step5.rpx > Step6.rpx > Tutorial 5.rpx Tutorial 5.xls* 29/10/2013 Tutorial 6\ (all 27/04/2017) > Step1.rpx > Step2.rpx > Step3.rpx > Step4.rpx > Tutorial 4.rpx > Tutorial 6.rpx Release Notes\ > Readme.rtf (03/08/2017) > Repute2.5.0.txt (03/08/2017) Reports\ Master.fr3 (10/02/2009) Report.html (31/07/2006) Report.xml (31/07/2006) > Repute2.fr3 (31/07/2017) Generated\ readme.txt (29/06/06) HTML\ (Include).xslt (all 30/07/2006, except *) Actions.xslt Algorithms.xslt All Items.xslt Calculations.xslt Design Standards.xslt Geometrical Objects.xslt Geotechnical Constituents.xslt Materials.xslt Project Information.xslt ReportNotAvailable.html* 27/06/2003 Scenarios.xslt Sections.xslt Structural Elements.xslt Icons\ (various) PGroupN\ PGroupN-Input.xslt Stylesheets\ Repute.css SVG\ SVG.xslt Welcome\ Atkins.gif (07/01/2011) Corus.gif (01/09/2009) Geocentrix.gif (10/05/2005) Geomarc.gif (28/11/2006) > Repute.css (11/01/2017) Repute.gif (13/05/2005) > Repute.html (26/05/2017) Stent.gif (07/01/2011) WordML\ (various) Sections\ Bearing Piles\ (all 29/08/2008) ArcelorMittal\ (all 12/01/2016, except *) HP\ (all 18-19/10/2016, except *) > HP ### x ##.xml (various names) HZ\ (all 19/10/2016, except *) > HZ 680M LT.xml > HZ 880M A.xml > HZ 880M B.xml > HZ 880M C.xml > HZ 1080M A.xml > HZ 1080M B.xml > HZ 1080M C.xml > HZ 1080M D.xml > HZ 1180M A.xml > HZ 1180M B.xml > HZ 1180M C.xml > HZ 1180M D.xml BS 4 Structural Steel Sections\ (all 20/01/2016) > UKB ###x###x###.xml (various names) Corus\ Advance\ (all 05/01/2016) > UKBP ###x###x###.xml (various names) Legacy\ (all 05/01/2016) > UKC ###x###x###.xml (various names) Wide flange beams\ > HE140B.xml (05/01/2016) Pipes\ (all 17/12/2010, except *) ANSI B36 Welded and Seamless Wrought Steel Pipe\ (all 27/09/2016) > NPS## x #.###.xml (various names) Corus\ (all 17/12/2016) > Celcius ##.# x #.#.xml (various names) Spun Piles\ ICP\ (all 08/12/2015, except *) > ICP ##A###.xml (various names) > ICP ##B###.xml (various names) > ICP ##C###.xml (various names) > ICP ##D###.xml (various names) MS 1314 Precast concrete products\ (mainly 13/07/2016) > Spun Pile ###A.xml (various names) > Spun Pile ###B.xml (various names) > Spun Pile ###C.xml (various names) ***ProgramData\Geocentrix\Repute\2.5*** MRU.ini (29/10/2010) Repute2.cfg (01/11/2010) Repute2.lic (29/10/2010) Repute2.log (29/10/2010) Materials\ Concretes\ C16-20.xml C20-25.xml C25-30.xml C30-37.xml C35-45.xml C40-50.xml C45-55.xml C50-60.xml Steels\ S235.xml S275.xml S355.xml S450.xml ***Sentinel LDK/HASP GUI installer*** > HASPUserSetup.exe (7.55.1.3941) > haspdinst.exe (7.55.3825.1) > FirmwareUpdate.exe (7.5.1.62469) ------------------------------- End of release notes -------------------------------