---------------------------- Release notes for Repute 2.0 (Update 9) ---------------------------- Release date: 04/11/2011 ©2002-11 Geocentrix Ltd. All rights reserved. "Geocentrix" and "Repute" are registered trademarks of Geocentrix Ltd. Release ------- Repute 2.0 Update 9 (Build 11050) Improvements in this release (65 issues) ---------------------------- 2299 Provide facility to change base diameters of piles in a group in one operation 2298 Pile undeream does not appear on Drawing Board 2297 Graphs of pile stresses should be drawn starting from the centre of Element 1, below ground (not Element 0, above ground) 2296 Algorithms do not appear in report 2294 Depth below ground shown as negative on Workbook's Boundary elements page 2293 Wizard generates wrong y position for Piles 1-2 and 4-5 in 5-pile group 2292 Wizard generates wrong y position for Piles 1-4 and 8-11 in 11-pile group 2291 Wizard generates wrong y position for Piles 1-3 and 8-10 in 10-pile group 2290 Wizard generates wrong y position for Piles 1-2 and 6-7 in 7-pile group 2288 Error message 'Pile shaft diameter ... Value entered = 1e+06 mm' when attempting to change diameter to 1000 mm 2287 Boundary element calculation is not aborted when rigid layer is too close to the pile toe 2286 Depth of pile toe is calculated incorrectly (sign is wrong) 2284 Cannot read heading text on report owing to dark background on Windows 7 2282 Non-linear boundary element analysis fails to model mid-layer water table properly 2281 Clay layers are treated as undrained in drained non-linear boundary element analysis 2280 Set default values for skin friction and bearing pressure limits to infinity in Boundary Element Analysis 2279 Boundary element analysis always models dry ground as below ground water level 2278 Strength of drained clay layers incorrectly modelled in boundary element analysis 2277 Cannot select a pile group on cross-section or elevation views 2274 Customize... button should be visible at all times 2272 Cannot import Piglet file containing undrained soil layer 2268 Allow pile cap to be rotated 2267 Display pile group centroid in group's Property Inspector 2266 Pile Group Wizard does not rotate the pile group despite angle of rotation being specified 2265 No message produced on Run Stage when no calculations are linked to stage 2264 Copyright notice on welcome page is out of date 2263 Add ability to install/re-install device drivers from within Repute 2262 “passed invalid handle to function - status code 9” 2259 Should not be able to set soil anisotropy to zero 2257 Allow program to model tubular concrete piles 2256 'Ultimate axial capacity of group exceeded' in Repute 2 for group that works in Repute 1.5 2255 Pile property inspector does not display torsional stiffness GJ 2254 Pile property inspector does not show updated EI and GJ values when anisotropy is changed from 1.0 2245 In boundary element analysis, automatic number of elements should also be the maximum number allowed 2244 Increase limit on custom wall friction from 35 degrees to cater for rock 2243 Error loading XML document when re-opening RPX file 2236 Improve layout of headings in Workbook pages 2235 Critical state cohesion for soil wrongly taken as peak cohesion on initialization 2234 Load vs displacement graph for Randolph Analysis shows no data 2230 'Expires' box is not empty on new installation 2228 Use different symbols to distinguish between settlements (s) and stresses (S) 2227 Limiting base pressure shown as 'INF' when it should have finite value 2225 The x,y coordinates of the calculated pile group centroid is missing from the output of results 2223 Controls are not resized to new panel size on Windows 7 64-bit 2220 Property Inspector allows a depth/level to be assigned to the ground surface 2219 Property Inspector allows a depth/level to be assigned to a borehole 2215 The notation Sxy for shear stress is misleading 2214 Stresses Sx, Sy etc are shown at element centre not at top in Workbook 2212 Pile-group stiffness coefficients in Workbook are different from those in corresponding Output.txt file produced by PGroupN 2211 Units of G, dG/dz, and mass density are missing from Soils report 2210 Soils report incorrectly labels dG/dz value as 'dE/dz' 2209 Wizards and dialog boxes have green background 2139 Provide facility to 'Upgrade From 1.5' 2033 Clarify meaning ot Sx etc and theta_x etc in Boundary Increment display 1986 Cannot link a Tubular Pile to a Custom Section 1908 PGroupN accepts only one value for lateral Young's modulus (insufficient for H-piles) 1879 Provide capability to import PGN files 1645 Duplicate controls for custom EC7 design standard 1508 Cannot select pile group by clicking on piles above ground surface 1433 Add design standard to cover Italian National Annex to Eurocode 7 1425 Force and moments should be drawn in front of the pile group, not behind 1417 Screenshot used in setup program is out of date 1360 Document name appears as 'Master' in Windows print queue 1332 Skins are not applied consistently across all dialog boxes 1121 Copy command on Message Board pop-up menu does not work Program files in this release ----------------------------- > indicates changed file ***Geocentrix executables*** >Repute2.exe (2.0.9) ***Geocentrix dynamic link libraries*** >Actions.dll (1.0.6) >Algorithms.dll (1.0.4) >BearingCoefficients.dll (1.0.5) >Boreholes.dll (3.0.3) >ConvertPGN.dll (2.0.4) EarthCoefficients.dll (3.0.1) >Engineering.dll (4.0.4) >Geocentrix.dll (4.1.18) >Grounds.dll (3.0.4) Interfaces.dll (3.0.1) >Materials.dll (4.0.5) >Piles.dll (2.0.10) >Platform.dll (4.1.10) >Project.dll (4.0.2) >Reports.dll (1.0.9) >Repute.dll (2.0.10) >Repute1.dll (2.0.5) >RexML.dll (1.0.10) >RexUI.dll (1.0.7) >Scenarios.dll (1.0.4) >Sections.dll (1.0.7) >Soils.dll (4.0.6) >Standards.dll (3.0.4) >Surcharges.dll (3.0.3) >WaterTables.dll (4.0.5) ***Boost dynamic link libraries*** boost_date_time-bcb-mt-1_34_1.dll boost_filesystem-bcb-mt-1_34_1.dll boost_program_options-bcb-mt-1_34_1.dll boost_signals-bcb-mt-1_34_1.dll boost_thread-bcb-mt-1_34_1.dll ***CodeGear dynamic link libraries*** borlndmm.dll (11.0.2902.10471) cc3280mt.dll.dll (8.0.0.2) ***CodeGear packages*** bcbie100.bpl (11.0.2902.10471) bdertl100.bpl (11.0.2902.10471) dbrtl100.bpl (11.0.2902.10471) rtl100.bpl (11.0.2902.10471) vcl100.bpl (11.0.2902.10471) vclactnband100.bpl (11.0.2902.10471) vcldb100.bpl (11.0.2902.10471) vcljpg100.bpl (11.0.2902.10471) vclx100.bpl (11.0.2902.10471) xmlrtl100.bpl (11.0.2987.10779) ***Developer Express packages*** *cxDataC11.bpl (2011.1.6.0) *cxEditorsC11.bpl (2011.1.6.0) *cxExportC11.bpl (2011.1.6.0) *cxGridC11.bpl (2011.1.6.0) *cxLibraryC11.bpl (2011.1.6.0) *cxPageControlC11.bpl (2011.1.6.0) *cxSpreadSheetC11.bpl (2011.1.6.0) *cxTreeListC11.bpl (2011.1.6.0) *cxVerticalGridC11.bpl (2011.1.6.0) *dxBarC11.BPL (2011.1.6.0) *dxBarExtItemsC11.bpl (2011.1.6.0) *dxComnC11.bpl (2011.1.6.0) *dxCoreC11.bpl (2011.1.6.0) *dxDockingC11.bpl (2011.1.6.0) *dxGDIPlusC11.bpl (2011.1.6.0) *dxLayoutControlC11.bpl (2011.1.6.0) *dxNavBarC11.bpl (2011.1.6.0) *dxPSCoreC11.bpl (2011.1.6.0) *dxPScxCommonC11.bpl (2011.1.6.0) *dxPScxExtCommonC11.bpl (2011.1.6.0) *dxPScxGridLnkC11.bpl (2011.1.6.0) *dxPScxPCProdLnkC11.bpl (2011.1.6.0) *dxPScxTLLnkC11.bpl (2011.1.6.0) *dxPScxVGridLnkC11.bpl (2011.1.6.0) *dxPSLnksC11.bpl (2011.1.6.0) *dxPSPrVwAdvC11.bpl (2011.1.6.0) *dxPSTeeChartC11.bpl (2011.1.6.0) *dxRibbonC11.bpl (2011.1.6.0) *dxSkinOffice2007BlackC11.bpl (21/09/2011) *dxSkinOffice2007BlueC11.bpl (21/09/2011) *dxSkinOffice2007GreenC11.bpl (21/09/2011) *dxSkinOffice2007SilverC11.bpl (21/09/2011) *dxSkinsCoreC11.bpl (2011.1.6.0) *dxSkinscxPCPainterC11.bpl (2011.1.6.0) *dxSkinsdxBarPainterC11.bpl (2011.1.6.0) *dxSkinsdxDLPainterC11.bpl (2011.1.6.0) *dxSkinsdxNavBarPainterC11.bpl (2011.1.6.0) *dxThemeC11.bpl (2011.1.6.0) ***FastReport packages*** *frx11.bpl (22/09/2011) *fs11.bpl (22/09/2011) ***Indy packages*** indy100.bpl (9.0.50.0) ***MJ Freelancing packages*** *MJFAFSystemC11.bpl (2.5.0.174) ***OCXs*** hhctrl.ocx (5.2.3790.4110) ***Raize Software packages*** DM15_100.bpl (1.5.2.0) ***Steema TeeChart packages*** *Tee911.bpl (9.0.3.0) *TeePro911.bpl (9.0.3.0) *TeeUI911.bpl (9.0.3.0) TeeUser9.hlp (07/06/2007) ***Turbopower packages*** XMLPartnerCR11.bpl (2.6.0.809) ***other files*** nethasp.ini (19/04/2011) Repute2.exe.manifest (10/02/2006) Engines\ AltovaXML.exe (8.0.1.0) iconv.dll (1.9.0.0) libexslt.exe (07/07/2004) libxml2.exe (07/07/2004) libxslt.exe (07/07/2004) xsltproc.exe (07/07/2004) zlib.dll (25/10/2003) Help\ Repute2.chm (22/09/2009) Manuals\ Repute 2 Quick-Start Guide.pdf (18/04/2011) Repute 2 Reference Manual.pdf (24/06/2010) Repute 2 User Manual.pdf (23/09/2009) Materials\ Concretes\ (all 22/06/2010) C8-10.xml C12-15.xml C16-20.xml C20-25.xml C25-30.xml C25.xml C30-37.xml C30.xml C35-45.xml C35.xml C40-50.xml C40.xml C45-55.xml C45.xml C50-60.xml C50.xml Steels\ (all 02/03/2009) Advance 275.xml Advance 355.xml S235.xml S275.xml S355.xml S450.xml Legacy\ (all 16/01/2009) 43.xml 50.xml 55.xml Fe360.xml Fe430.xml Fe510.xml Sheet piles\ (all 02/03/2009) S240GP.xml S270GP.xml S320GP.xml S355GP.xml S390GP.xml S430GP.xml Structural\ (all 02/03/2009) S235.xml S275.xml S355.xml S450.xml PGroupN\ > PGroupN2-1000.exe (2.0.40.11050) > PGroupN2-2000.exe (2.0.40.11050) > PGroupN2-3000.exe (2.0.40.11050) > PGroupN2-4000.exe (2.0.40.11050) > PGroupN2-5000.exe (2.0.40.11050) > PGroupN2-6000.exe (2.0.40.11050) Projects\ Benchmarks\ (all 28/05/2009) RPT-001.rpx RPT-002.rpx RPT-003.rpx Examples\ (all 11/09/2009) Bond and Harris (2008) Ex 13.1.rpx Fleming (1992).rpx Fleming et al Chapter 4 Example 1 (1992).rpx Large circular group.rpx Randolph (1992).rpx Tomlinson (1994).rpx PGroup\ Problem1.pg (12/09/2002) PGroupN\ 2D-Linear.pgn (26/04/2002) etc... Repute 1 Tutorial 1\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step6.pgn* 11/01/2009 Step6.rpx Step6.xml* 11/01/2009 Tutorial 2\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step8.pgn* 11/01/2009 Step8.rpx Step8.xml* 11/01/2009 Tutorial 3\ (all 24/05/2004, except *) Step1.rpx Step2.rpx Step3.rpx Step4.pgn* 11/01/2009 Step4.rpx Step4.xml* 11/01/2009 Tutorial1.rpx Templates\ (empty) Tutorial 1\ (all 11/09/2009) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Tutorial 1.rpx Tutorial 2\ (all 11/09/2009) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 2.rpx Tutorial 3\ (all 11/09/2009) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Step7.rpx Step9.rpx Tutorial 3.rpx Tutorial 4\ (all 29/10/2010) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 4.rpx Tutorial 5\ (all 27/09/2009, except *) Step1.rpx* 11/09/2009 Step2.rpx Step3.rpx Step4.rpx Step5.rpx Step6.rpx Tutorial 5.rpx Tutorial 5.xls Tutorial 6\ (all 29/10/2010) Step1.rpx Step2.rpx Step3.rpx Step4.rpx Tutorial 4.rpx Tutorial 6.rpx Release Notes\ > Readme.rtf (04/11/2011) Repute2.0.0.txt (28/09/2009) Repute2.0.1.txt (02/11/2009) Repute2.0.2.txt (27/11/2009) Repute2.0.3.txt (10/01/2010) Repute2.0.4.txt (19/02/2010) Repute2.0.5.txt (30/03/2010) Repute2.0.6.txt (23/07/2010) Repute2.0.7.txt (04/11/2010) Repute2.0.8.txt (19/04/2011) > Repute2.0.9.txt (04/11/2011) Reports\ Master.fr3 (10/02/2009) Report.html Report.xml > Repute.fr3 (31/10/2011) Generated\ readme.txt (29/06/06) HTML\ (Include).xslt (all 30/07/2006, except *) Actions.xslt Algorithms.xslt All Items.xslt Calculations.xslt Design Standards.xslt Geometrical Objects.xslt Geotechnical Constituents.xslt Materials.xslt Project Information.xslt ReportNotAvailable.html* 27/06/2003 Scenarios.xslt Sections.xslt Structural Elements.xslt Icons\ (various) PGroupN\ PGroupN-Input.xslt Stylesheets\ Repute.css SVG\ SVG.xslt Welcome\ Atkins.gif Corus.gif Geocentrix.gif Geomarc.gif Repute.css Repute.gif Repute.html Stent.gif WordML\ (various) Sections\ Bearing Piles\ (all 29/08/2008) UKBP 203x203x 45.xml UKBP 203x203x 54.xml UKBP 254x254x 63.xml UKBP 254x254x 71.xml UKBP 254x254x 85.xml UKBP 305x305x 79.xml UKBP 305x305x 88.xml UKBP 305x305x 95.xml UKBP 305x305x110.xml UKBP 305x305x126.xml UKBP 305x305x149.xml UKBP 305x305x186.xml UKBP 305x305x223.xml UKBP 356x368x109.xml UKBP 356x368x133.xml UKBP 356x368x152.xml UKBP 356x368x174.xml Corus\ Advance\ (all 29/08/2008, except *) Summary table.xslt* 27/02/2009 UKBP 203x203x 45.xml UKBP 203x203x 54.xml UKBP 254x254x 63.xml UKBP 254x254x 71.xml UKBP 254x254x 85.xml UKBP 305x305x 79.xml UKBP 305x305x 88.xml UKBP 305x305x 95.xml UKBP 305x305x110.xml UKBP 305x305x126.xml UKBP 305x305x149.xml UKBP 305x305x186.xml UKBP 305x305x223.xml UKBP 356x368x109.xml UKBP 356x368x133.xml UKBP 356x368x152.xml UKBP 356x368x174.xml UKBP range* 27/02/2009 Legacy\ (all 27/02/2009, except *) Summary table.xslt UKC 152x152x 23.xml UKC 152x152x 30.xml UKC 152x152x 37.xml UKC 203x203x 60.xml UKC 203x203x 71.xml UKC 203x203x 88.xml UKC 254x254x107.xml* 05/03/2009 UKC 254x254x132.xml* 05/03/2009 UKC 254x254x167.xml* 05/03/2009 UKC 305x305x137.xml* 05/03/2009 UKC 305x305x158.xml* 05/03/2009 UKC 305x305x198.xml* 05/03/2009 UKC 305x305x240.xml* 05/03/2009 UKC 305x305x283.xml* 05/03/2009 UKC 356x368x202.xml* 05/03/2009 UKC 356x406x235.xml* 05/03/2009 UKC 356x406x287.xml* 05/03/2009 UKC 356x406x340.xml* 05/03/2009 UKC 356x406x393.xml UKC 356x406x467.xml UKC 356x406x551.xml UKC 356x406x634.xml UKC range Pipes\ Celcius 219.1 x 6.3.xml Celcius 219.1 x 8.0.xml Celcius 219.1 x 10.0.xml Celcius 219.1 x 12.5.xml Celcius 219.1 x 16.0.xml Celcius 244.5 x 12.5.xml Celcius 244.5 x 16.0.xml Celcius 273.0 x 10.0.xml Celcius 273.0 x 12.5.xml Celcius 273.0 x 16.0.xml Celcius 323.9 x 10.0.xml Celcius 323.9 x 12.5.xml Celcius 323.9 x 16.0.xml Celcius 355.6 x 16.0.xml Celcius 406.4 x 10.0.xml Celcius 406.4 x 16.0.xml Celcius 457.0 x 10.0.xml Celcius 457.0 x 16.0.xml Celcius 508.0 x 12.5.xml Celcius 508.0 x 16.0.xml NSP24 x 0.500.xml NSP30 x 0.625.xml NSP36 x 0.625.xml NSP36 x 0.750.xml NSP42 x 1.000.xml Anon\ (all 16/12/2010, except *) NPS24 x 0.500.xml NPS30 x 0.562.xml NPS30 x 0.625.xml* 17/12/2010 NPS30 x 0.688.xml NPS30 x 0.750.xml NPS36 x 0.625.xml NPS36 x 0.688.xml NPS36 x 0.750.xml NPS36 x 0.875.xml NPS36 x 1.000.xml NPS36 x 1.250.xml NPS42 x 0.688.xml NPS42 x 0.750.xml NPS42 x 0.875.xml NPS42 x 1.000.xml NPS42 x 1.250.xml NPS42 x 1.500.xml NPS42 x 1.750.xml NPS42 x 2.000.xml NPS48 x 0.750.xml NPS48 x 0.875.xml NPS48 x 1.000.xml NPS48 x 1.250.xml NPS48 x 1.500.xml NPS48 x 1.750.xml NPS48 x 2.000.xml NPS48 x 2.250.xml NPS48 x 2.500.xml Pipe range.xml* 17/12/2010 Summary table.xslt* 16/02/2009 Corus\ (all 25-30/06/2010, except *) Celcius 21.3 x 3.2 Celcius 26.9 x 3.2 Celcius 33.7 x 3.2 Celcius 33.7 x 4.0 Celcius 42.4 x 3.2 Celcius 42.4 x 4.0 Celcius 48.3 x 3.2 Celcius 48.3 x 4.0 Celcius 48.3 x 5.0 Celcius 48.3 x 6.3 Celcius 48.3 x 5.6 Celcius 48.3 x 4.5 Celcius 48.3 x 3.6 Celcius 48.3 x 2.9 Celcius 48.3 x 2.6 Celcius 42.4 x 2.6 Celcius 42.4 x 2.9 Celcius 42.4 x 3.6 Celcius 42.4 x 4.5 Celcius 42.4 x 5.0 Celcius 21.3 x 2.6 Celcius 21.3 x 2.9 Celcius 26.9 x 2.6 Celcius 26.9 x 2.9 Celcius 26.9 x 3.6 Celcius 33.7 x 2.6 Celcius 33.7 x 2.9 Celcius 33.7 x 3.6 Celcius 33.7 x 4.5 Celcius 33.7 x 5.0 Celcius 60.3 x 2.6 Celcius 60.3 x 2.9 Celcius 60.3 x 3.2 Celcius 60.3 x 3.6 Celcius 60.3 x 4.0 Celcius 60.3 x 4.5 Celcius 60.3 x 5.0 Celcius 60.3 x 5.6 Celcius 60.3 x 6.3 Celcius 60.3 x 8.0 Celcius 76.1 x 2.9 Celcius 76.1 x 3.2 Celcius 76.1 x 3.6 Celcius 76.1 x 4.0 Celcius 76.1 x 4.5 Celcius 76.1 x 5.0 Celcius 76.1 x 5.6 Celcius 76.1 x 6.3 Celcius 76.1 x 8.0 Celcius 88.9 x 2.9 Celcius 88.9 x 3.2 Celcius 88.9 x 3.6 Celcius 88.9 x 4.0 Celcius 88.9 x 4.5 Celcius 88.9 x 5.0 Celcius 88.9 x 5.6 Celcius 88.9 x 6.3 Celcius 88.9 x 8.0 Celcius 88.9 x 10.0 Celcius 101.6 x 3.2 Celcius 101.6 x 3.6 Celcius 101.6 x 4.0 Celcius 101.6 x 4.5 Celcius 101.6 x 5.0 Celcius 101.6 x 5.6 Celcius 101.6 x 6.3 Celcius 101.6 x 8.0 Celcius 101.6 x 10.0 Celcius 114.3 x 3.2 Celcius 114.3 x 3.6 Celcius 114.3 x 4.0 Celcius 114.3 x 4.5 Celcius 114.3 x 5.0 Celcius 114.3 x 5.6 Celcius 114.3 x 6.3 Celcius 114.3 x 8.0 Celcius 114.3 x 10.0 Celcius 139.7 x 3.2 Celcius 139.7 x 3.6 Celcius 139.7 x 4.0 Celcius 139.7 x 4.5 Celcius 139.7 x 5.0 Celcius 139.7 x 5.6 Celcius 139.7 x 6.3 Celcius 139.7 x 8.0 Celcius 139.7 x 10.0 Celcius 139.7 x 12.5 Celcius 168.3 x 5.0 Celcius 168.3 x 5.6 Celcius 168.3 x 6.3 Celcius 168.3 x 8.0 Celcius 168.3 x 10.0 Celcius 168.3 x 12.5 Celcius 193.7 x 5.0 Celcius 193.7 x 5.6 Celcius 193.7 x 6.3 Celcius 193.7 x 8.0 Celcius 193.7 x 10.0 Celcius 193.7 x 12.5 Celcius 193.7 x 16.0 Celcius 219.1 x 4.5 Celcius 219.1 x 5.0 Celcius 219.1 x 5.6 Celcius 219.1 x 6.3 Celcius 219.1 x 8.0 Celcius 219.1 x 10.0 Celcius 219.1 x 12.5 Celcius 219.1 x 14.2 Celcius 219.1 x 16.0 Celcius 244.5 x 5.0 Celcius 244.5 x 5.6 Celcius 244.5 x 6.3 Celcius 244.5 x 8.0 Celcius 244.5 x 10.0 Celcius 244.5 x 12.5 Celcius 244.5 x 14.2 Celcius 244.5 x 16.0 Celcius 273.0 x 5.0 Celcius 273.0 x 5.6 Celcius 273.0 x 6.3 Celcius 273.0 x 8.0 Celcius 273.0 x 10.0 Celcius 273.0 x 12.5 Celcius 273.0 x 14.2 Celcius 273.0 x 16.0 Celcius 323.9 x 5.0 Celcius 323.9 x 5.6 Celcius 323.9 x 6.3 Celcius 323.9 x 8.0 Celcius 323.9 x 10.0 Celcius 323.9 x 12.5 Celcius 323.9 x 14.2 Celcius 323.9 x 16.0 Celcius 355.6 x 6.3 Celcius 355.6 x 8.0 Celcius 355.6 x 10.0 Celcius 355.6 x 12.5 Celcius 355.6 x 14.2 Celcius 355.6 x 16.0 Celcius 406.4 x 6.3 Celcius 406.4 x 8.0 Celcius 406.4 x 10.0 Celcius 406.4 x 12.5 Celcius 406.4 x 14.2 Celcius 406.4 x 16.0 Celcius 457.0 x 6.3 Celcius 457.0 x 8.0 Celcius 457.0 x 10.0 Celcius 457.0 x 12.5 Celcius 457.0 x 14.2 Celcius 457.0 x 16.0 Celcius 508.0 x 6.3 Celcius 508.0 x 8.0 Celcius 508.0 x 10.0 Celcius 508.0 x 12.5 Celcius 508.0 x 14.2 Celcius 508.0 x 16.0 Pipe range.xml* 28/06/2010 Summary table.xslt* 24/06/2010 ***Documents and Settings\All Users\Application Data\Geocentrix\Repute*** MRU.ini (29/10/2010) Repute2.cfg (01/11/2010) Repute2.lic (29/10/2010) Repute2.log (29/10/2010) ------------------------------- End of release notes -------------------------------