---------------------------- Release notes for ReWaRD 2.8 ---------------------------- ©1992-2020 Geocentrix Ltd. All rights reserved. "Geocentrix" and "ReWaRD" are registered trademarks of Geocentrix Ltd. Release date: 25/09/2020 Contents: ReWaRD 2.8 Release 3 ReWaRD 2.8 Release 2 ReWaRD 2.8 Release 1 Program files in the latest build ReWaRD 2.8 Release 3 -------------------- Version 2.8.3.20091 Build date 25/09/2020 Issues fixed (23 items): 3447 Program crashes on importing licence 3446 Draw a horizontal line to indicate level and type of water table 3445 Cannot select ground profile or excavation on drawing 3444 Line is drawn above top of wall to top of stepped ground on displaying results 3441 Program crashes on importing LIC file via Licence Registration Wizard 3426 Results vary slightly between BS 8002:2015 and EN 1997-1:2004 3424 Enable renewal of licence from the Internet 3401 Examples from Clayton and Militisky book no longer work 3400 Not clear that custom earth pressure coefficients are inclined values 3396 Grey box appears to left corner while the program is opening 3389 Open construction stages automatically on program startup 1531 'Wall isn't long enough' when retaining large stepped ground profile 1312 Tension crack fluid pressure calculated incorrectly in presence of standing water 1214 Pressing OK button in a dialog box does not trigger OK command (click OK button with mouse does) 1057 Burland-Potts method gives anomolous safe embedment length for wall in stiff clay (short-term) 971 Program crashes calculating structural forces with wide berm 639 Wall too stable with imposed load acting on it 628 Unexpected result using berm 624 Wall is stable at both ends of the search range for FOS=1.0 for a multi-propped wall with minimal embedment 608 Earth pressure coeffs not available for secondary parameter = -0.894723 603 Factor of safety fp in PH is different on the program than on the manual 532 Cannot calculate minimum safe embedment or bending moments for wall with berm 505 Cannot calculate full influence of berm: wall too short ReWaRD 2.8 Release 2 -------------------- Version 2.8.2.20061 Build date 09/07/2020 Issues fixed (19 items): 3394 This product requires at least a non-virtualized hardware system. Setup cannot continue 3391 Message Board no longer gives detailed information about progress of calculations 3390 Provide facility to read MAC address of host computer 3388 Anchor is drawn with a shorter than realistic free length 3387 No explanation why calculation with anchor in berm does not proceed 3384 Stepped ground profile is drawn with a vertical face 3383 Program crashes on attempting to create a new anchor 3356 Program crashes on printing to "Microsoft Print to PDF" driver 3350 Error "Unable to locate any Feature matching scope" when attempting to export C2V file 3349 x,y coordinates are not shown on the Status Bar 3348 Program crashes on selecting command File > Print > Print Preview 3347 The character '&' in a Company Name appears as '&' in the Licence Registration box 3345 Warning message displays wrong value for maximum angle of shearing resistance 3335 User Manual is out of date 3332 Program is not disabled when outside ReAssurance period 3187 Display horizontal components of prop and anchor forces as well as axial values 2841 Error message "missing/misplaced objects in the construction prototype’’ should give more useful information 2500 Change label in Licence Registration Wizard to 'Company Name' 538 Earth pressure coefficients not available for soil friction=8.35... (see kerisel.rdb) ReWaRD 2.8 Release 1 -------------------- Version 2.8.1.20021 Released 11/02/2020 Issues fixed (2 items): 3327 Nothing happens when CIRIA C550 or C760 standards are selected 3326 Boreholes do not appear on Drawing Board ReWaRD 2.8 beta 2 ----------------- Version 2.8.0.19092 Released 01/10/2019 Issues fixed (1 item): 3272 Allow ReWaRD 2.8 to be authorized with a ReWaRD 3.x licence ReWaRD 2.8 beta 1 ----------------- Version 2.8.0.19080 Released 23/08/2019 Issues fixed (10 items): 3253 Values for 'Allowable range' not given in error message generated by Construction Wizard 3178 Allow the program's licence to be imported directly from LIC file 3177 Allow angles to be entered in radians or degrees 3176 Provide separate controls for Depth and Level wherever relevent 3122 Display both density and weight controls on Weight/Density page of Soil property box 3094 Discrepancies in Ka and Kp values vs those given in Eurocode 7 Annex C 3014 Provide separate depth and level controls 3010 Program does not detect soft clay profile when calculating displacements 2836 IP address not entered into error message "The security key at does not contain a licence for ReWaRD" 2615 Add menu item to allow user to install device drivers Program files in the latest build --------------------------------- > indicates file has changed from the previous release folder > ReWaRD2.exe (2.8.3) > AnchorsOWL.dll (2.20.3) BoreholesOWL.dll (2.20.2) > CoefficientsOWL.dll (2.20.3) > ExcavationsOWL.dll (2.20.3) > GeocentrixOWL.dll (2.20.3) > GroundsOWL.dll (2.20.3) InterfacesOWL.dll (2.20.2) > LayersOWL.dll (2.20.3) > LoadsOWL.dll (2.20.3) MaterialsOWL.dll (2.20.2) ProjectOWL.dll (2.20.2) > PropsOWL.dll (2.20.3) > RexUIOWL.dll (2.20.3) SoilsOWL.dll (2.20.2) > StandardsOWL.dll (2.20.3) SupportsOWL.dll (2.20.2) > SurchargesOWL.dll (2.20.3) WallsOWL.dll (2.20.2) > WaterTablesOWL.dll (2.20.3) boost_date_time-bcb-mt-1_39.dll boost_filesystem-bcb-mt-1_39.dll boost_serialization-bcb-mt-1_39.dll boost_system-bcb-mt-1_39.dll cc32250mt.dll (1.144.0.0) > hasp_windows_48297.dll (8.11.42174.60000) > libcrypto-1_1.dll (1.1.1.7) > libcurl.dll (7.71.1.0) > libssl-1_1.dll (1.1.1.7) owl-6.44-b730-x86-t.dll (6.44.1.0) vtssdl32.dll (2.0.5.5) > zlib1.dll (2.2.11.0) hhctrl.ocx (5.2.3790.4110) Clough.dat (27/06/2013) Databases\ (all 14/09/2019, except where noted) Chalk.rdb Chsvfil.rdb Chsvsilt.rdb Clay.rdb Custsoil.rdb Granfill.rdb Gransilt.rdb Gravel.rdb Organic.rdb Rivrsoil.rdb Rock.rdb Sand.rdb Sections.rdb (21/07/2014) Help\ ReWaRD2.chm (13/07/2011) Layouts\ All.rwt (31/01/2000) Coeffs.rwt (31/01/2000) Default.rwt (31/01/2000) Design.rwt (31/01/2000) Soil.rwt (31/01/2000) Srcharge.rwt (31/01/2000) Manuals\ ReWaRD 2 Quick-Start Guide.pdf (07/02/2020) ReWaRD 2 Reference Manual.pdf (07/08/2015) ReWaRD 2 User Manual.pdf (03/04/2020) Release Notes\ > readme.rtf (25/09/2020) > ReWaRD2.8.3.txt (25/09/2020) C:\ProgramData\Geocentrix\ReWaRD\2.8\ ------------------------------------- MRU.ini (29/10/2010) ReWaRD2.lic (01/02/2018) ReWaRD2.log (01/02/2018) C:\Users\Public\Documents\Geocentrix\ReWaRD\2.8\ ------------------------------------------------ Examples\ (all 09/07/2020 except where noted) Bowles.rwd > Clayton.rwd (20/09/2020) Handbook.rwd Templates\ (all 07/08/2014) bottom up.bmp bottom up.RWT CIRIA 104.bmp CIRIA 104.RWT default soils.bmp default soils.RWT Kuala Lumpur.bmp Kuala Lumpur.RWT London.bmp London.RWT Piling Handbook.bmp Piling Handbook.RWT Singapore.bmp Singapore.RWT top down.bmp top down.RWT tutorial.bmp tutorial.RWT Tutorials\ Tutorial 1\ (all 09/07/2020 except where noted) Step 1.rwd Step 2.rwd Step 3.rwd Step 4.rwd Step 5.rwd Tutorial 1.rwd Tutorial 2\ (all 09/07/2020 except where noted) Step 1.rwd Step 2.rwd Step 3.rwd Step 4.rwd Step 5.rwd Step 6.rwd Step 7.rwd Step 8.rwd Step 9.rwd Tutorial 2.rwd Tutorial 3\ (all 09/07/2020 except where noted) Step 1.rwd Step 2.rwd Step 3.rwd Step 4.rwd Step 5.rwd Step 6.rwd Step 7.rwd Step 8.rwd Step 9.rwd Tutorial 3.rwd ***Sentinel HASP/LDK Windows Run-time Installers*** Setup\ Sentinel HASP-LDK\ inventory.txt Firmware Update\ FirmwareUpdate.exe (7.5.1.62469) readme.html HASP\ License Manager Setup (Win32)\ 135-Install_LM_Under_Windows_7.pdf lmsetup.exe (8.32.5.40) readme.html Removal Tool\ aksinstdel_windows.exe (1.0.22017.1) readme.html Windows Run-time Enviroment\ > Release Notes.pdf Command-line Installer\ command line switches.txt > haspdinst.exe (8.13.39675.1) > readme.html GUI Installer\ > HASPUserSetup.exe (8.13.45217.60000) > readme.html ------------------------------- End of release notes -------------------------------