; ; NetHASP Configuration file syntax. ; ; ; Note: ; ; All text lines were commented. ; Remove comments in the lines you want to use. ; [NH_COMMON] ; ; Section-specific Keywords ; ; ; You can set either of the following three Keywords to "Enabled"! ; ;;NH_IPX = Enabled or Disabled ; Use the IPX protocol ;;NH_NETBIOS = Enabled or Disabled ; Use the NETBIOS protocol ;;NH_TCPIP = Enabled or Disabled ; Use the TCP/IP protocol ;;NH_MACHINE = IBM or NEC ; The computer on which the protected ; application is activated. ; Default: IBM ; ; General Keywords ; ;;NH_SESSION = ; See Adapting the Timeout Length ;;NH_SEND_RCV = ; in the HASP Programmer's Guide. [NH_IPX] ; ; Section-specific Keywords for the IPX protocol. ; ;;NH_USE_BINDERY = Enabled or Disabled ; Use IPX with bindery. ; Default: Disabled ; Ignored under Win32 API. ; This switch replaces older switch ; named NH_USE_SAP. ;;NH_USE_BROADCAST = Enabled or Disabled; Use IPX Broadcast mechanism. ; Default: Enabled ;;NH_BC_SOCKET_NUM = ; Broadcast socket number (HEX). ; Default: 7483H ;;NH_USE_INT = 2F_NEW or 7A_OLD ; 2F_NEW means that IPX protocol will ; use interrupt 2Fh ONLY. ; 7A_OLD means that IPX protocol will ; use interrupt 7Ah ONLY. ; Default: 2F_NEW. ;;NH_SERVER_NAME = , ,.. ; Communicate with the NetHASP ; Server with the specified name. ; Maximum: 6 names, up to 7 ; case-insensitive characters each. ;;NH_SEARCH_METHOD = Localnet or Internet ; See Local Networks and ; Internetworks in the HASP ; Programmer's Guide. ;;NH_DATFILE_PATH = ; Specify the location of the NetHASP ; License Manager's address file. ; ; General Keywords ; ;;NH_SESSION = ; See Adapting the Timeout Length ;;NH_SEND_RCV = ; in the HASP Programmer's Guide. [NH_NETBIOS] ; ; Section-specific Keywords for the NetBIOS protocol. ; ;;NH_NBNAME = ; Assign a name to the NetHASP ; License Manager. ; 1 name possible, up to 8 ; case-insensitive characters. ;;NH_USELANANUM = ; Assign a lana number to be used ; as a communication channel. ; ; General Keywords ; ;;NH_SESSION = ; See Adapting the Timeout Length ;;NH_SEND_RCV = ; in the HASP Programmer's Guide. [NH_TCPIP] ; ; NetHASP does not support TCP/IP under DOS. ; ; ; Section-specific Keywords for the TCP/IP protocol. ; ;;NH_SERVER_ADDR = , ; IP addresses of all the NetHASP ; License Managers you want to search. ; Unlimited addresses and multiple ; lines are possible. ; ; Possible address format examples: ; IP address: 192.114.176.65 ; Local Hostname: ftp.aladdin.co.il ;;NH_PORT_NUMBER = ; Set the TCP/IP port number. This is ; optional. The default number is 475. ;;NH_TCPIP_METHOD = TCP or UDP ; Send a TCP packet or UDP packet ; Default: UDP ;;NH_USE_BROADCAST = Enabled or Disabled; Use TCPI/IP Broadcast mechanism. ; Default: Enabled ;;NH_SERVER_NAME = , , ; Communicate with the NetHASP ; Server with the specified name. ; Maximum: 6 names, up to 7 ; case-insensitive characters each. ; ; General Keywords. ; ;;NH_SESSION = ; See Adapting the Timeout Length ;;NH_SEND_RCV = ; in the HASP Programmer's Guide.