Repute 2 Update 4

[Geocentrix Support]

Repute 2.0 Update 4 has been released and can be downloaded from the program's updates page http://www.geocentrix.co.uk/repute/update.

Improvements in this release are:

1873 River soil state uses rock instead of soil descriptions
1871 Database values of undrained strength are not totally consistent with EN ISO 14688
1868 Drawing doesn't update when different stage is selected in Project Manager
1862 Direction of horizontal force does not change when sign of force changes in the x-direction
1857 Message "Berezantzev's bearing coefficients are for deep foundations only" when generating report
1855 Weight density of Soil 2 is out of range (for dry sand) in Step 3 of Tutorial 4
1853 Access violation in kernel32.dll after clicking on borehole
1852 Version number written to RPX file does not include update version (e.g. 2.0, not 2.0.3)
1851 Visual Fortran run-time error when running boundary element analysis on single pile
1850 No error message generated when pile cap is below ground level
1849 Warning 'No design standard has been specified' even though it has
1844 Increase allowable pile free-standing length from 3m to more than 6.5m
1842 Access violation dragging item from Stockyard onto Drawing Board when no scenario is selected
1840 Need to clarify sign convention and axis orientation (since it differs from Repute 1.x)
1839 Repute does not login to Licence Manager as Program 3
1838 Program does not retain login to Network Licence Manager
1835 boost::filesystem error on startup
1834 Sign of Theta X and Theta Y is wrong in Workbook
1833 Sign of Mx and Mx is different on output in Workbook than entered via Property Inspector
1830 Setup program creates redundant 'Repute 2' folder under Documents and Settings
1825 Copyright notice on welcome page is out-of-date
1711 Hyperbolic torsion factor is not passed to boundary element engine
1651 On validating dry and wet soil mass density, error message gives values of weight density
1639 Critical error when negative value entered into ready reckoner
1442 Layers and water tables do not appear in reports