Geocentrix Repute - Onshore pile design and analysis

Latest updates for Repute 2 and Repute 1.x

Repute 2.0.5 (Update 5)

Released 30th March 2010

Repute2Setup.exe (41.7 MB)

Release notes

• 2.0.5 (Update 5) March 2010 - current
• 2.0.4 (Update 4) February 2010
• 2.0.3 (Update 3) January 2010
• 2.0.2 (Update 2) November 2009
• 2.0.1 (Update 1) November 2009
• 2.0.0 (Original release) September 2009

Note for existing Repute 1.x users

To upgrade the licence stored in your security key from version 1.x to 2.0, you will need to install and run our upgrade utility Registrar. Full instructions are given in this technical note.

You can run Repute 2.0 and Repute 1.5 Update 8 (or later) on the same computer using your Repute 2.0 licence number. However, you cannot run Repute 2.0 with Repute 1.5 Update 7 (or earlier) or with Repute 1.0.

To update Repute

1. Uninstall your existing version of Repute via Windows Control Panel
2. Download the update to a convenient folder on your local computer (e.g. C:\TEMP)
3. Install the update by choosing the Run... command on Windows' Start Menu. Enter the path to the installation program in the Open field (e.g. C:\TEMP\Repute2Setup.exe) and click OK
4. Follow the on-screen instructions
5. Run Repute by choosing Programs > Geocentrix > Repute 1.x from Windows' Start Menu

Latest device drivers for Repute

Visit the following page for detailed instructions for obtaining the latest device drivers for Repute:

Link to drivers page

Note for network editions of Repute

To obtain the latest version of the Network Licence Manager that is used to provide Repute's networking capabilities, please visit the following page:

Link to drivers page

Repute 1.5 Update 11 

Released November 2009

Repute1Setup.exe (25.7 MB)

Release notes

• Update 11 (November 2009 - current)
• Update 10 (October 2009)
• Update 9 (August 2009)
• Update 8 (March 2009)
• Update 7 (August 2008)
• Update 6 (June 2008)
• Update 5 (November 2007)
• Update 4 (June 2007)
• Update 3 (May 2007)
• Update 2 (January 2007)
• Update 1 (September 2006)
• Original release (July 2006)

Hotfix 1, released 20th January 2010

This hotfix solves a problem displaying the pile group stiffness matrix (issue #1831). Instructions:

1. Create a backup copy of the file 'Pile Group Stiffnesses.xslt', located in the folder C:\Program Files\Geocentrix\Repute\1.5\
   Reports\Detailed
2. Download the replacement file Pile Group Stiffnesses.xslt, saving it into the folder specified in the previous step

This hotfix will be incorporated into Update 12 (when released).

Note for existing Repute 1.0 users

To upgrade the licence stored in your security key from version 1.0 to 1.5, you will need to install and run our upgrade utility Registrar.

You can run Repute 1.5 and Repute 1.0 Update 10 (or later) on the same computer using your Repute 1.5 licence number. However, you cannot run Repute 1.5 with Repute 1.0 Update 9 (or earlier).

Repute 1.0 Update 10

Released April 2006

Development of Repute 1.0 has ceased. This is the last update for this version of the program:

Repute10Setup.exe (12.3 MB)

You MUST uninstall any existing version of Repute before installing Update 10. If you are running a network edition of Repute prior to Update 9, you MUST update the Network Licence Manager (see instructions alongside).

Release notes

• Update 10 (April 2006)
• Update 9 (October 2005)
• Update 8 (May 2004)
• Update 7 (February 2004)
• Update 6 (October 2003)
• Update 5 (August 2003)
• Update 4 (June 2003)
• Update 3 (April 2003)
• Update 2 (March 2003)
• Update 1 (January 2003)
• Original release (December 2002)